News

Principle Of Heat Dissipation Design Of Paper Shredder

Jan 18, 2025 Leave a message

 

During the operation of the paper shredder, the electric motor will generate a lot of heat, especially in the case of continuous shredding, the heat generation is particularly serious. In order to ensure the normal operation of the paper shredder and extend its service life, a reasonable heat dissipation design is particularly important. The following are the main principles of heat dissipation design of the paper shredder:

1. Heat dissipation structure design

The heat dissipation structure design of the paper shredder mainly includes parts such as the motor cover, the air inlet, the air outlet and the axial spacing cavity. The motor cover is used to accommodate the electric motor. The motor cover is extended along the axial direction of the electric motor and has two ends, which are the tail end and the outlet end of the electric motor. The motor cover is provided with an air inlet and an air outlet. The air inlet and the air outlet are staggered along the axial direction of the electric motor. An axial spacing cavity is formed between the motor cover and the electric motor, and the axial spacing cavity is used to flow cooling air.

2. Partition design

In some embodiments, a partition is provided at the air outlet, which divides the axial spacing cavity into two, and a connecting interval is provided between the partition and the outer peripheral wall of the electric motor, and the connecting interval connects the axial spacing cavity divided into two. Such a design helps the cooling airflow to maintain a certain flow rate in the entire axial direction of the electric motor, reduces the adverse effects caused by the long length, and helps to improve the heat dissipation performance of the electric motor.

3. Exhaust fan

In some embodiments, the air outlet is located at the top of the motor cover, and the air outlet is provided with an exhaust fan. Since the hot air flow tends to rise, this design is conducive to smoother air flow and avoids the accumulation of hot air flow, thereby improving the cooling efficiency and effect.

4. Airflow inlet and airflow outlet

The electric motor is provided with an airflow inlet and an airflow outlet, the airflow inlet is located at the tail end, and the airflow outlet is away from the tail end and is located on the right side of the partition. After such a design, on the one hand, the airflow can flow through the interior of the electric motor to achieve more efficient cooling, and on the other hand, the airflow outlet is on the right side of the partition, so that the air in the cavity of the axial partition cavity located on the right side of the partition is driven by the airflow flowing out of the airflow outlet to increase a certain flow rate to avoid heat accumulation.

5. Inlet fan

The tail of the electric motor is provided with a tail output shaft, and the tail output shaft is connected to the air intake fan. The air intake fan can effectively increase the air intake speed, thereby improving the cooling effect. The air intake fan will be driven by the tail output shaft of the electric motor to rotate, which is conducive to simplifying the structure.

6. Bottom shell design

In some embodiments, the bottom shell of the shredder is also included, and the bottom shell includes a bottom plate. The bottom plate is provided with an inlet arranged toward the motor cover. After such a design, on the one hand, the structure is relatively simple, and on the other hand, it is conducive to the replenishment of cold air flow and the arrangement toward the motor cover, so that the cooling efficiency and effect can be further improved.

Through the above design, the heat dissipation performance of the shredder has been significantly improved, which helps to reduce failures caused by overheating and extend the service life of the equipment.

Send Inquiry