News

How To Deal With The Corrosion Of The Safety Bolt?

Nov 15, 2021 Leave a message

(1) Maintain from smoothness. In order to maintain a reasonable maintenance cycle and keep the machine running well, it is necessary to pay attention to the connection between the electromagnetic safety lock body and the oil filling point on the right side of the rear end of the fuselage, and make this filling point smooth and lithium-based. The fat is smooth and normal maintenance.


(2) Cultivate from habits. The first is to control the workload and the number of cutters per knife, try to prevent overload and overload; the second is to consider the lithographic printing machine from the machine itself, do not let the machine stand still for a long time, even if it is not working, work several times regularly to avoid corrosion related part.


(3) Develop a good habit of opening and closing 3D printing, avoid violating the rules and regulations, pay attention to the startup sequence, pay attention to "air pump stop button-knife bed function selection switch"-cut off switch knife selection switch-main motor stop button when shutting down. "Power switch" prevents inertial sliding when shutting down.


 (4) Regularly check the pull-in conditions of safety components such as electromagnetic clutch, electromagnet on the transmission wheel, brake ring, friction ring, etc., and check whether the brake components such as the tool lever safety screw can work normally. Weihai prints normally to eliminate safety issues. accident.


(5) Judging from the sound. If the sound of the electromagnetic pin is abnormal and the bolts and screws cannot lock the cutter bed when the machine is stopped, the function of the bolts should be checked.


Send Inquiry