In the double-toothed roller crusher, the reducer must be regarded as one of the links in the entire equipment. The motor-hydraulic coupling device-reducer-crushing roller-frame. In design theory, the service life of a transmission device affected by equivalent torque can be equal to the transmission life effect of the actual load spectrum, that is, it has the same static strength and fatigue strength safety factor.
The precision of the components and the expected dispersion of the materials in the reducer of the double-toothed roller crusher directly affect the gear meshing performance. Hope to choose the coupling as the protection device of the whole system of the crusher. Because it is a simple and inexpensive part. Because the hydraulic coupling mainly protects the motor, it has no protective effect on the reducer, and the host of the crusher requires that the reducer can withstand 8.2 times the rated load. This is not encountered in conventional design, so the static strength of the gear must also be considered. So that the gear will not be damaged under the condition of large load. The safety factors of all links must be coordinated, that is, it must be checked how the failure of each link works. Therefore, in the entire system, it is hoped that simple and low-cost parts are damaged as the protection of the entire system.
The gears of the double-toothed roller crusher are all made of 20CrNi2MoA low-carbon high-nickel-chromium alloy steel, which adopts the carburizing quenching and grinding process, and the depth of the surface hardened layer is 0.02-0.25m. In order to improve the bending strength of the gear, all the carburized hardened gears Shot peening, in order to ensure the strength and rigidity of the box body and improve the carrying capacity of the body, a cast steel body is used, the material is ZG53, especially the body is a large cantilever plate-like structure. In order to improve contact accuracy, improve contact parts, and increase load carrying capacity The gear is modified to finish the grinding.
