product description

Industrial Cross Cut Paper Shredder although the basic concept behind a shredder is relatively simple, several sophisticated engineering methods are used in its design and manufacture. The common shredder that can be found in a home office is a simpler type of shredder with one, two, or more blades. They are usually in-line, with material fed through a chute at the top of the shredder and stored in baskets or containers.

Shredders designed for industrial use are more complex and must be designed specifically for the material they will dismantle. A major concern with industrial shredders is the size and shape of the final material, which can be anything from a few inches to pellets.

Industrial Cross Cut Paper Shredder hard core point is that the internal data can be processed cleanly, whether it is for public or private purposes, a paper shredder can be used to achieve an efficient means of quickly shredding data.

Secrecy is better, depends on the level of security.

Mainly use different processing methods to define the grade of a model.

The speed should be consistent with the amount of shredded paper actually put in. Once the shredded paper is unevenly placed, the shredded paper will be bent. The combined duster must be replaced habitually when it is full.

In addition, the speed setting is not less than 0.5m per second, and it is estimated that 6400 sheets can be successfully processed in one hour.

The paper inlet should be kept at the same angle as the shredded paper. The vertical opening is usually used. If the paper opening is too narrow, it is easy to fold in one place, jam, and the probability of paper jams is high.

Explain that the entrance is required to be no less than 385mm wide. This is the method that makes it difficult to use details.

Since some noise cannot be avoided during the shredding process, the normal model is about 62 decibels.

In addition, if you want to increase the amount of paper input, the sound will undoubtedly increase.

Safe touch stop technology: Whether this function is available or not indicates whether the safety is in place. The advantage of touch stop is that hair or clothing corners inadvertently enter the shredded opening, which can immediately prevent it from continuing to work.

Industrial Cross Cut Paper Shredder delivers optimal efficiency, shredding up to 200 sheets automatically and 10 sheets manually. Voltage: 120 volts. Frequency: 60 Hz.
Micro-cut function reduces paper to 5/64 x 15/32 in. (2 x 12 mm) tiny shreds; meets high security P-5 standards; shreds 10 times smaller than standard cross-cut shredders. Approximately 2,592 shreds per letter sheet
Runs for 60 minutes non-stop; anti-jam auto-reverses to clear jams. Ultra-quiet operation
Auto-sleep for energy-saving safety